-
2012-05-10
-
2012-03-31
-
2012-02-29
-
2012-02-10
-
2011-12-31
-
2011-12-22
-
2011-12-01
-
2011-10-25
-
2011-09-09
-
2011-8-13
-
2011-2-28
-
2011-01-05
-
2010-10-17
-
2010-10-11
Single door controller with built-in EM reader
Introduction of Single door controller with built-in EM reader
HM1000 is stand alone, single door access controller with built-in EM ID Proximity card reader. With 1000 user capacity, user management can be choosed by master card or IR keypad or by PC

Specification of Single door controller
| Power requirements | 9-15VDC at 100 mA, A linear regulator is recommended |
| interface | Wiegand26 |
| Reader range | 8-15 cm, ( 4-10 cm for mifare module ) |
| Frequency | 125KHz |
| Support card | EM ID card or EM 4100 compatible RFID cards |
| Operation temperature | -20℃~60℃ |
| operationg humidity | 5%-95% relative humidity non-condensing |
| Audio/Visual Indication | Green & Red LED and Buzzer signal output |
| Dimension | 121mm * 45mm * 22mm |
| Output relay | 6A 250AC; 10A 24DC |
| Weight | 200gram |
Function description
1.Built-in EM format Proximity card reader module
2.Master card for adding or deleting, can be built by user
3.Support exit button (activated by lower voltage)
4.External wiengad26 interface, works with wiegand 26 reader easily expanding the system with different RFID proximity card technology, such as HID proximity card or Mifare RFID cards
5.Using IR remoter keypad manages the users
6.lock open delay time is adjustable at 1 or 5 seconds
7.dry C type relay output, suitable for all kinds of lock
8.PC software manages the users
English
Español
Stand alone controller
Networked controller
Door Controller
DT32/16 elevator controller