Security products involving access control card readers & access controller system

EM01 module

•    

  1,Output format: TTL level RS232

  W26/W34

• 2,Input Voltage: 5V.
• 3,Reading distance: 5-15cm.
• 4,Card type: 125KHz EM or compatible ID
• 5,Input current: less than 15mA.
• 6,Pin out drawing:
  1.       ( 1 )GND
  2.       ( 2 )+5V
  3.       ( 3 )D0( TXD for RS232 )
  4.       ( 4 )D1( NC for RS232 )
  5.       ( 5&6 )antenna
  6.       ( 7 )NC
• 7,Antenna: L=345uH~490uH( size: 35mm X 50mm, use 0.2mm magnet wire, 51turns )。
• 8,Module zise: 2.5( long ) X 4( wide ) X 0.6( high ) cm
• 9,RS232 format: port setting 9600,N,8,1, data format: 4byte card number in Hex Or by customer requirement
• 10,Mechanical drawing for module:
  •